Definitely dual stack if you do. The real benefit of IPv6 is that, supposedly, each of your internal devices can have its own address and be directly accessible, but I don’t think anyone actually wants all of their internal network exposed to the internet. My ISP provides IPv6, but only a single /128 address, so everything still goes through NAT.
Setting it up was definitely a learning process - SLAAC vs DHCP; isc’s dhcpd uses all different keywords for 6 vs 4, you have to run 6 and 4 in separate processes. It’s definitely doable, but I think the main benefit is the knowledge you gain.
Your ISP is doing it wrong, which I guess you already know. I get a /64 net via DHCPv6 for my LAN which is pretty standard.
+1 to dual stack. Too much of the internet is v4 only, missing AAAA, or various other issues. I’ve also had weird issues where a Google/Nest speaker device would fail 50% of the time and other streaming devices act slow/funky. Now I know that means the V6 net is busted and usually I have to manually release/renew. Happens once every few months, but not in a predictable interval.
Security is different, but not worse IMO. It’s just a firewall and router instead of a NAT being added in. A misconfigured firewall or enabling UPnP is still a bad idea with potentially worse consequences.
Privacy OTOH is worse. It used to be that each device included a hardware MAC as part of a statelessly generated address. They fixed that on most devices. Still, each device in your house may end up with a long lived (at least as long as your WAN lease time) unique IP that is exposed to whatever sites you visit. So instead of a unique IP per household with IPv4 and NAT, it’s per network device. Tracking sites can differentiate multiple devices in the house across sites.
This has me thinking I need to investigate more on how often my device IPv6 (or WAN lease subnet) addresses change.
And the biggest disadvantage of IPv6 is that each of your internal devices has its own address and can be directly accessible from outside. So you need to completely rethink how you do security.
Isn’t that what tburkhol addressed in their first paragraph? Or are you suggesting further steps than just putting those devices behind NAT? I am not at all trying to be snarky, I actually want to know more about this.
You don’t need to use nat on ipv6. Most routers are based on Linux and there you have conntrack.
With that you can configure by default outgoing only connections just like nat and poke holes in the firewall for the ports you want specifically.
Also windows and I think Linux use ipv6 privacy extensions by default. That means that while you can assign a fixed address and run services, it will assign random ip addresses within your (usually) /64 allocation for outgoing connections. So people can’t identify you and try to connect back to your ip with a port scanner etc.
All the benefits of nat with none of the drawbacks.
And can be identified/tracked individually by outside entities. In IPv4, a website sees both my device and my kid’s device as the same IP. In IPv6 they’re different so this just provides more ways for them to track you.
First of all they use much more than the device IP to identify individual devices. IPv4 is no longer all that useful for identification with things like CGNAT being common.
But with IPv6 they’ll see my device IP, then they’ll see the same device with completely different IP, then again. Same for my kid’s device. But again, all of the above applies. It is a concern, but there are much better ways of tracking you anyways.
Definitely dual stack if you do. The real benefit of IPv6 is that, supposedly, each of your internal devices can have its own address and be directly accessible, but I don’t think anyone actually wants all of their internal network exposed to the internet. My ISP provides IPv6, but only a single /128 address, so everything still goes through NAT.
Setting it up was definitely a learning process - SLAAC vs DHCP; isc’s dhcpd uses all different keywords for 6 vs 4, you have to run 6 and 4 in separate processes. It’s definitely doable, but I think the main benefit is the knowledge you gain.
Your ISP is doing it wrong, which I guess you already know. I get a /64 net via DHCPv6 for my LAN which is pretty standard.
+1 to dual stack. Too much of the internet is v4 only, missing AAAA, or various other issues. I’ve also had weird issues where a Google/Nest speaker device would fail 50% of the time and other streaming devices act slow/funky. Now I know that means the V6 net is busted and usually I have to manually release/renew. Happens once every few months, but not in a predictable interval.
Security is different, but not worse IMO. It’s just a firewall and router instead of a NAT being added in. A misconfigured firewall or enabling UPnP is still a bad idea with potentially worse consequences.
Privacy OTOH is worse. It used to be that each device included a hardware MAC as part of a statelessly generated address. They fixed that on most devices. Still, each device in your house may end up with a long lived (at least as long as your WAN lease time) unique IP that is exposed to whatever sites you visit. So instead of a unique IP per household with IPv4 and NAT, it’s per network device. Tracking sites can differentiate multiple devices in the house across sites.
This has me thinking I need to investigate more on how often my device IPv6 (or WAN lease subnet) addresses change.
Removed by mod
Just wait until IoT takes off and every key on your keyboard has a unique address
And the biggest disadvantage of IPv6 is that each of your internal devices has its own address and can be directly accessible from outside. So you need to completely rethink how you do security.
Isn’t that what tburkhol addressed in their first paragraph? Or are you suggesting further steps than just putting those devices behind NAT? I am not at all trying to be snarky, I actually want to know more about this.
You don’t need to use nat on ipv6. Most routers are based on Linux and there you have conntrack.
With that you can configure by default outgoing only connections just like nat and poke holes in the firewall for the ports you want specifically.
Also windows and I think Linux use ipv6 privacy extensions by default. That means that while you can assign a fixed address and run services, it will assign random ip addresses within your (usually) /64 allocation for outgoing connections. So people can’t identify you and try to connect back to your ip with a port scanner etc.
All the benefits of nat with none of the drawbacks.
And can be identified/tracked individually by outside entities. In IPv4, a website sees both my device and my kid’s device as the same IP. In IPv6 they’re different so this just provides more ways for them to track you.
First of all they use much more than the device IP to identify individual devices. IPv4 is no longer all that useful for identification with things like CGNAT being common.
But with IPv6 they’ll see my device IP, then they’ll see the same device with completely different IP, then again. Same for my kid’s device. But again, all of the above applies. It is a concern, but there are much better ways of tracking you anyways.
That’s the reason for rcf 4941. It randomises the host part of your IPv6 address.
https://datatracker.ietf.org/doc/html/rfc4941