My unRAID server has 12 data drives, 2 parity drives, and 3 SSD cache pools. Plus dual Xeons on a SuperMicro ATX board.

I currently have the Deep Silence 5 case by Nanoxia. But things are cramped. I’ve filled all the standard drive bays, plus put in a 4-bay 5.25 enclosure. But I still have one of the SSDs just floating around.

What would a better case to put all this stuff in?

  • thejevans@lemmy.ml
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    1
    ·
    1 year ago

    At that price, your only real option is to get lucky on eBay with an old supermicro rack mount chassis.

      • thejevans@lemmy.ml
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        The fractal design 7 xl might give you what you want, but at $200 + 5x drive cage kits at $20 each + upgrading and maxing out the fans ~$100, you’re looking at closer to $400, and there are mixed reviews on how well it can keep your drives cool.

        Once you get above 10-12 drives, you’re going to need to look at enterprise gear, or building a custom solution. There just isn’t much consumer hardware at that level.

        • tomten@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          I have a 12 drive setup in a define 7 (not xl) and it’s working fine. As long as I keep the filters decently clean from dust the temps are fine.

              • thejevans@lemmy.ml
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                I’m putting this here because I couldn’t find a good summary anywhere else on the Internet:

                There hasn’t been much work on this recently, but a summary of the scholarly work in this field can be found between these sources:

                The 2013 paper unfortunately is stuck behind a paywall, but message me if you would like to read it.

                My suggestion given the work in the field would be to keep temperatures around 30°C if you can because at higher temperatures, you could be reducing the lifespan of your drives.