Hi!

I have an ASUS AMD Advantage Edition laptop (https://rog.asus.com/laptops/rog-strix/2021-rog-strix-g15-advantage-edition-series/) that runs windows. I haven’t gotten time to install linux and set it up the way I like yet, still after more than a year.

I’m just dropping a small write-up for the set-up that I’m using with llama.cpp to run on the discrete GPUs using clbast.

You can use Kobold but it meant for more role-playing stuff and I wasn’t really interested in that. Funny thing is Kobold can be set up to use the discrete GPU if needed.

  1. For starters you’d need llama.cpp itself from here: https://github.com/ggerganov/llama.cpp/tags.

    Pick the clblast version, which will help offload some computation over to the GPU. Unzip the download to a directory. I unzipped it to a folder called this: "D:\Apps\llama"

  2. You’d need a llm now and that can be obtained from HuggingFace or where-ever you’d like it from. Just note that it should be in ggml format. If you have a doubt, just note that the models from HuggingFace would have “ggml” written somewhere in the filename. The ones I downloaded were “nous-hermes-llama2-13b.ggmlv3.q4_1.bin” and “Wizard-Vicuna-7B-Uncensored.ggmlv3.q4_0.bin”

  3. Move the models to the llama directory you made above. That makes life much easier.

  4. You don’t really need to navigate to the directory using Explorer. Just open Powershell where-ever and you can also do cd D:\Apps\llama\

  5. Here comes the fiddly part. You need to get the device ids for the GPU. An easy way to check this is to use “GPU caps viewer”, go to the tab titled OpenCl and check the dropdown next to “No. of CL devices”.

    The discrete GPU is normally loaded as the second or after the integrated GPU. In my case the integrated GPU was gfx90c and discrete was gfx1031c.

  6. In the powershell window, you need to set the relevant variables that tell llama.cpp what opencl platform and devices to use. If you’re using AMD driver package, opencl is already installed, so you needn’t uninstall or reinstall drivers and stuff.

    $env:GGML_OPENCL_PLATFORM = “AMD”

    $env:GGML_OPENCL_DEVICE = “1”

  7. Check if the variables are exported properly

    Get-ChildItem env:GGML_OPENCL_PLATFORM
    Get-ChildItem env:GGML_OPENCL_DEVICE

    This should return the following:

    Name Value


    GGML_OPENCL_PLATFORM AMD

    GGML_OPENCL_DEVICE 1

    If GGML_OPENCL_PLATFORM doesn’t show AMD, try exporting this: $env:GGML_OPENCL_PLATFORM = “AMD”

  8. Once these are set properly, run llama.cpp using the following:

    D:\Apps\llama\main.exe -m D:\Apps\llama\Wizard-Vicuna-7B-Uncensored.ggmlv3.q4_0.bin -ngl 33 -i --threads 8 --interactive-first -r “### Human:”

    OR

    replace Wizard with nous-hermes-llama2-13b.ggmlv3.q4_1.bin or whatever llm you’d like. I like to play with 7B, 13B with 4_0 or 5_0 quantized llms. You might need to trawl through the fora here to find parameters for temperature, etc that work for you.

  9. Checking if these work, I’ve posted the content at pastebin since formatting these was a paaaain: https://pastebin.com/peSFyF6H

    salient features @ gfx1031c (6800M discrete graphics):
    llama_print_timings: load time = 60188.90 ms
    llama_print_timings: sample time = 3.58 ms / 103 runs ( 0.03 ms per token, 28770.95 tokens per second)
    llama_print_timings: prompt eval time = 7133.18 ms / 43 tokens ( 165.89 ms per token, 6.03 tokens per second)
    llama_print_timings: eval time = 13003.63 ms / 102 runs ( 127.49 ms per token, 7.84 tokens per second)
    llama_print_timings: total time = 622870.10 ms

    salient features @ gfx90c (cezanne architecture integrated graphics):
    llama_print_timings: load time = 26205.90 ms
    llama_print_timings: sample time = 6.34 ms / 103 runs ( 0.06 ms per token, 16235.81 tokens per second)
    llama_print_timings: prompt eval time = 29234.08 ms / 43 tokens ( 679.86 ms per token, 1.47 tokens per second)
    llama_print_timings: eval time = 118847.32 ms / 102 runs ( 1165.17 ms per token, 0.86 tokens per second)
    llama_print_timings: total time = 159929.10 ms

Edit: added pastebin since I actually forgot to link it. https://pastebin.com/peSFyF6H

  • fatboy93@lemm.eeOP
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 year ago

    I did post this on reddit first, since this community never pops on my feed and I was unsure if its inactive. But here it goes here as well!