I would really appreciate it if someone could help me with this. I’m having an issue with my Sovol SV06, which is that I get a lot of stringing. I’m still fairly new to 3D printing, so I have no idea what could cause this and how I could go about fixing this. I already searched for this issue online btw but didn’t really find anything helpful.

The only change I made to this printer is that I hooked up a Raspberry Pi 4 to it and installed Klipper and Octoprint. I’m also using PrusaSlicer with the config from here.

Edit: Forgot to mention I was using PLA for this print

  • Stampela
    link
    fedilink
    English
    arrow-up
    4
    ·
    2 months ago

    This could be two things, aside from what you considered. Did you increase the speed? Because if I remember correctly the SV06 has a bit of a wimpy cooling system, and as opposed to the SV07, no extra fan on the back. Another thing to consider is that sometimes you just have a filament that is stringy, did you try a different one, or so far it’s your only option?

      • Fisch@discuss.tchncs.deOP
        link
        fedilink
        English
        arrow-up
        3
        ·
        edit-2
        2 months ago

        I’m using PLA. How would I go about drying it?

        Edit: Just saw that someone commented how to dry it by using the printer’s bed.

      • Stampela
        link
        fedilink
        English
        arrow-up
        1
        ·
        2 months ago

        True about PETG, but the thing about a specific filament being stringy stands: I have a green PETG that, once it gets some time in the drier, is almost perfect. And an orange one, that can sit in the drier a whole day but still string.

    • Fisch@discuss.tchncs.deOP
      link
      fedilink
      English
      arrow-up
      3
      ·
      2 months ago

      The config I’m using has increased speed compared to the default settings. I heard about the cooling system too, I could try lowering the speed to see if it helps and if it does, I saw online that you can swap the fan for a bigger one. Which speeds would I have to lower, exactly?

      • AtHeartEngineer@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        2 months ago

        Ya lowering the speed is a good thing to try. Also, you may have a very slight clog in the nozzle which can lead to weird behavior like stringing and under extrusion

          • AtHeartEngineer@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            2 months ago

            You could swap the nozzle, or do a cold pull. Honestly it would be a little challenging to explain that well over text, especially since I am not familiar with your specific printer (I’ve used and own a lot of them though). The best bet would be to look up on YouTube how to do a cold pull, or swap the nozzle. Some good YouTube channels are Teaching Tech, CNC Kitchen, and Made with Layers. Teaching Tech and made with layers are probably where you will find the best info for a beginner, but CNC Kitchen is 🔥

      • Stampela
        link
        fedilink
        English
        arrow-up
        1
        ·
        2 months ago

        A bit hard to tell, as every printer is different, but try a small test file at let’s say 100 mm/s? I use Cura (really, really dislike the Slic3r/Prusa Slicer/Orca interface) and here it’s called “Print Speed”. Changing that will lower the others in the same way, can’t imagine it works differently in Prusa Slicer.

        • Fisch@discuss.tchncs.deOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          2 months ago

          That speed is already faster than what my printer settings were. I have tested lower print speeds tho but it didn’t make a difference.